Tell us what you are searching for e.g. Higher Education

Electrotechnical Experienced Worker Qualification – Level 3

Print this page
Courses Code
QD3ELECEWR
Study method
Part Time
Cost
£1700
Location(s)
View courses
Print this page
  • Is this course for you?

    This qualification is designed solely for those experienced persons who are, or have been, working in the electrotechnical industry, practicing as an electrician, for a minimum of 5 years.

    There are two pathways within this qualification, ‘Installation’ and ‘Maintenance’.

    This qualification is not suitable for new entrants to the electrotechnical industry, apprentices, or other operatives who require any training, or those who have completed an electrotechnical technical certificate with less than five years’ relevant industry experience.

  • Required qualifications

    Applicants must hold a relevant Level 2 technical qualification within electrotechnical such as the City and Guilds 2365 Electrical Installation Level 2. Other qualifications can be considered, such as the City and Guilds 2330 Level 2.

    Please speak to a lecturer for more information or refer to the City and Guilds website.

  • What skills will I develop?

    This qualification is designed solely for those experienced persons who are, or have been, working in the electrotechnical industry, practising as an electrician, for a minimum of 5 years and who can demonstrate their technical knowledge, performance and competence to the industry standards at Level 3 in one of the occupations of this qualification and in line with the current edition of the IET wiring regulations (BS 7671).

  • Careers

    Learners who successfully complete the Experienced Worker Qualification as well as the occupational competence assessment (AM2E), delivered by NET, will be judged to have met the eligibility requirements sufficient to apply for an ECS Card from the JIB in the occupation that they have qualified.

  • Work experience

    The qualification needs the learner to be active in the electrical industry.

  • English and maths

    You will need a good level of English and maths to complete the qualification. You may have a short diagnostic prior to the start of the programme to establish your level if you do not hold a qualification.

  • Other important information

    To achieve the City & Guilds Level 3 Electrotechnical Experienced Worker Qualification (Installation or Maintenance) learners must also complete the following:

    • Level 3 Award in the Requirements for Electrical Installations BS 7671: 2018 (35 GLH)
    • Level 3 Award in Initial Verification of Electrical Installations (36 GLH)

    These may be taken in advance of registering on the 2346-03 or may be taken in tandem with the 2346-03 but these must be completed before claiming certification for the 2346-03.

    Once achieved these must be claimed as proxy units using unit numbers 2346-801 and 802.

  • Is this course for you?

    This qualification is designed solely for those experienced persons who are, or have been, working in the electrotechnical industry, practicing as an electrician, for a minimum of 5 years.

    There are two pathways within this qualification, ‘Installation’ and ‘Maintenance’.

    This qualification is not suitable for new entrants to the electrotechnical industry, apprentices, or other operatives who require any training, or those who have completed an electrotechnical technical certificate with less than five years’ relevant industry experience.

  • Required qualifications

    Applicants must hold a relevant Level 2 technical qualification within electrotechnical such as the City and Guilds 2365 Electrical Installation Level 2. Other qualifications can be considered, such as the City and Guilds 2330 Level 2.

    Please speak to a lecturer for more information or refer to the City and Guilds website.

  • What skills will I develop?

    This qualification is designed solely for those experienced persons who are, or have been, working in the electrotechnical industry, practising as an electrician, for a minimum of 5 years and who can demonstrate their technical knowledge, performance and competence to the industry standards at Level 3 in one of the occupations of this qualification and in line with the current edition of the IET wiring regulations (BS 7671).

  • Careers

    Learners who successfully complete the Experienced Worker Qualification as well as the occupational competence assessment (AM2E), delivered by NET, will be judged to have met the eligibility requirements sufficient to apply for an ECS Card from the JIB in the occupation that they have qualified.

  • Work experience

    The qualification needs the learner to be active in the electrical industry.

  • English and maths

    You will need a good level of English and maths to complete the qualification. You may have a short diagnostic prior to the start of the programme to establish your level if you do not hold a qualification.

  • Other important information

    To achieve the City & Guilds Level 3 Electrotechnical Experienced Worker Qualification (Installation or Maintenance) learners must also complete the following:

    • Level 3 Award in the Requirements for Electrical Installations BS 7671: 2018 (35 GLH)
    • Level 3 Award in Initial Verification of Electrical Installations (36 GLH)

    These may be taken in advance of registering on the 2346-03 or may be taken in tandem with the 2346-03 but these must be completed before claiming certification for the 2346-03.

    Once achieved these must be claimed as proxy units using unit numbers 2346-801 and 802.

Apply for a course

  • Electrotechnical Experienced Worker Qualification (Installation) Level 3- (FC)

    Off Site

    Start Date: Start Any Time

    Code: QXD3ELECEWR

    Cost: £1700

    Part Time: 39 Weeks